Clinics & care environments
Ceiling-based deployment for selected rooms, corridors, and shared clinical spaces.
SUVOS is a ceiling-mounted UV-C disinfection system designed to operate around room occupancy. Integrated occupancy sensing and a physical iris help protect occupants from UV-C exposure: when people are detected, UV-C is switched off and the iris remains closed; when the room is clear, SUVOS can perform automated disinfection.
Full product demonstration showing the restroom workflow and automated disinfection sequence.
Watch SUVOS coordinate disinfection around room occupancy. The operating-state cards highlight automatically as the demonstration progresses.
With the area clear, SUVOS is operating in the disinfection state.
Rotate the model, zoom in on the ceiling-mounted enclosure, and operate the iris to understand the external product architecture.
SUVOS is intended for locations where disinfection can be coordinated around vacancy or controlled access. Final placement, cycle settings, safety controls, and validation are determined for each installation.
Ceiling-based deployment for selected rooms, corridors, and shared clinical spaces.
Automated disinfection for high-use spaces with intermittent occupancy.
Occupancy-coordinated disinfection for shared indoor work environments.
An adaptable architecture for spaces with predictable access patterns.
SUVOS certification and compliance marks.
These tools are intended for engineering discussion and preliminary planning. Modeled irradiance and literature-derived pathogen estimates are not validated efficacy claims for a specific SUVOS installation.
Airborne results assume room-air mixing. Surface estimates use direct beam only. Planner outputs support preliminary sizing and are not a validated efficacy claim for a specific installation.
Modeled irradiance visualization. False-color scale represents modeled UV-C irradiance.
| Surface | Modeled µW/cm² |
|---|---|
| Sink rim | 23.4 |
| Toilet seat | 20.2 |
| Floor | 14.4 |
| Flush button | 12.4 |
| Door handle | 6.3 |
Values are model outputs for the stated example geometry, not measured performance at every installation.
| Organism / surrogate | k (m²/J) |
|---|---|
| Influenza A | 0.27 |
| Measles (influenza value) | 0.27 |
| COVID-19 (mouse coronavirus) | 0.377 |
| Tuberculosis (bacterial stand-in) | 0.35 |
| Common cold / rhinovirus (low confidence) | 0.03 |
| Organism / surrogate | D90 (µJ/cm²) |
|---|---|
| E. coli | 2320 |
| MRSA | 2700 |
| Norovirus (calicivirus stand-in) | 5560 |
| SARS-CoV-2 | 1230 |
Literature-based estimates may use surrogate data; not product efficacy claims.
| Modeled UV-C output | 600 mW per unit, adjustable in planner |
|---|---|
| Beam model | Super-Gaussian fit; 924.7 mW/sr on-axis at modeled 600 mW |
| Mounting | Ceiling, pointing down |
| Planning coverage | 1 SUVOS per 9 m² (~100 sq ft); closer spacing shortens modeled time and improves uniformity |
| Sensing | PIR + radar |
| Electrical input | 12 V DC, 2.0 A, 20 W maximum; other voltages on request |
| Certifications | ETL Listed (Intertek) to ANSI/UL 8802; conforms to UL 1598 and CSA C22.2 No. 250.0; FCC; CE |
Tell us about the room type, ceiling conditions, occupancy pattern, disinfection objective, and deployment scale.