5×5 S6060 Array iUVC™
Key Features and Benefits:
- One 5x5 S6060 Array can disinfect 3,000 liters per minute of air in situ, killing 99.9% of aerosolized staph bacteria and SARS2-COVID19
- Highest Wall Plug Efficiency (WPE) in the industry (6.5%), resulting in shortest irradiation times
- Typical 2.5W optical power at 600mA, 275nm (268nm – 278nm) wavelength, and 36 to 40V DC input voltage
- Highest optical power per dollar value in the industry, enabling lowest cost of ownership
- Five parallel branches of five in-series LED electrical configuration, Each parallel LED string has a separate driver
- Constant current self-regulating drivers mounted on the PCB produce a stabilized input current through each string of LEDs
- Reduced engineering and simplified manufacturing without the need to solder
- Strong roadmap for future wavelength, WPE, and lifetime improvements
Applications：
- Disinfection of high flow rate water and air treatment and high demand, including longer-distance and short kill time, surface treatment
Reference design available for qualified customers
Previous
Next
Performance at 25°C ambient and active cooling
| Parameter | Symbol | Unit | Min. |
Typ. 350mA/LED |
Max 500mA/LED |
|---|---|---|---|---|---|
|
Peak Wavelength |
λp |
nm |
255 |
270 |
280 |
|
Radiant Flux |
Φе |
Wopt |
2.0 |
2.2 |
2.5 |
|
Forward Voltage (LED + Driver Electronics) |
VF |
V |
30 |
33 |
40 |
|
Forward Current |
IF |
A |
- |
1.75 |
2.50 |
|
Spectrum Half Width |
Δλ |
nm |
- |
11 |
- |
|
View Angle |
2Ө½ |
° |
- |
150 |
- |
|
Thermal Resistance |
RJ-b |
℃/W |
- |
<10 (TBD) |
- |
Download Full Product Specifications PDF
DownloadHow can we support your disinfection project today?
Warning
UV emitted from this product. Avoid eye and skin exposure to unshielded product.
UVC LEDs emit deep ultraviolet radiation, with extremely high intensity near their surface. This allows rapid disinfection but safety precautions must be observed during assembly,
testing and field use.
By purchasing the UVC chips (bare dice), packaged LEDs or arrays and from BOLB Inc., the customer agrees to indemnify the manufacturer of any bodily harm as a result of failure to follow the common sense precautions, or warnings and guidelines contained within this Specifications.
It is the buyer’s responsibility to properly design products that ensure safety of end users.
All assembly workers, operators and bystanders must wear eye and skin protection when the UVC LEDs are energized. Bare-eye observation (including through microscopes) and bare-hand handling of a UVC LED in operation is PROHIBITED.
UVC light can be easily absorbed, so any oil or other absorbent liquid or solid substance must NOT be allowed to touch the sapphire side of the UVC chip, or the dome lens on a packaged LED.
