1×12 S6060 Array
Key Features and Benefits:
- Delivers 670 µW/cm² intensity at a distance of 1m
- One 1x12 S6060 Array can disinfect 150 Cubic feet per minute air in situ, killing 99.9% of aerosolized staph bacteria and SARS2-COVID19
- Highest Wall Plug Efficiency (WPE) in the industry (7%), resulting in shortest irradiation times
- Typical 1.2W optical power at 1A, 275nm (268nm – 278nm) wavelength, and 24V DC input voltage
- Highest optical power per dollar value in the industry, enabling lowest cost of ownership
- Four parallel branches of three in-series LED electrical configuration
- Each parallel LED string has a separate driver
- Constant current self-regulating drivers mounted on the PCB produce a stabilized input current to the LEDs
- Fixed current setting range from 0.8 and 1.4 Amps
- Reduced engineering and simplified manufacturing without the need to solder
- Strong roadmap for future wavelength, WPE, and lifetime improvements
Applications：
- High demand air treatment, including upper air room disinfection, air troffers, floor standing air purifiers etc.
Reference Design available for qualified customers
Previous
Next
Performance at 25°C ambient and active cooling
| Parameter | Symbol | Unit |
Min. 100mA/LED |
Typ. 250mA/LED |
Max 350mA/LED |
|---|---|---|---|---|---|
|
Peak Wavelength |
λp |
nm |
255 |
270 |
280 |
|
Radiant Flux |
Φе |
Wopt |
0.5 |
1.2 |
1.8 |
|
Forward Voltage (LED + Driver Electronics) |
VF |
V |
22 |
24 |
28 |
|
Forward Current |
IF |
A |
0.4* |
1.0* |
1.4* |
|
Spectrum Half Width |
Δλ |
nm |
- |
11 |
- |
|
View Angle |
2Ө½ |
° |
- |
150 |
- |
|
Thermal Resistance |
RJ-b |
℃/W |
- |
<10 (TBD) |
- |
*set by BOLB (optional)
Download Full Product Specifications PDF
DownloadHow can we support your disinfection project today?
Warning
UV emitted from this product. Avoid eye and skin exposure to unshielded product.
UVC LEDs emit deep ultraviolet radiation, with extremely high intensity near their surface. This allows rapid disinfection but safety precautions must be observed during assembly,
testing and field use.
By purchasing the UVC chips (bare dice), packaged LEDs or arrays and from BOLB Inc., the customer agrees to indemnify the manufacturer of any bodily harm as a result of failure to follow the common sense precautions, or warnings and guidelines contained within this Specifications.
It is the buyer’s responsibility to properly design products that ensure safety of end users.
All assembly workers, operators and bystanders must wear eye and skin protection when the UVC LEDs are energized. Bare-eye observation (including through microscopes) and bare-hand handling of a UVC LED in operation is PROHIBITED.
UVC light can be easily absorbed, so any oil or other absorbent liquid or solid substance must NOT be allowed to touch the sapphire side of the UVC chip, or the dome lens on a packaged LED.
