S3535-H 1×12 iUVC™ New
Key Features and Benefits:
- Highest Wall Plug Efficiency (WPE) in the industry (6-7%), resulting in shortest irradiation times
- The default array delivers up to 100µW/cm² intensity on-axis from 1m away at 350mA/LED
- One 1x12 S3535 Array can disinfect 150 Cubic feet per minute air in situ, killing 99.9% of aerosolized staph bacteria and SARS2- COVID19
- Practical 1-inch x 12 inboard configuration Reduced engineering and simplified manufacturing without the need to solder Each parallel LED string has a separate driver Constant current drivers on the PCB produce a stabilized input current to the LEDs Fixed current setting range from 1 and 1.4 Amps
- High-demand air treatment, including upper air room disinfection, air troffers, floor standing air purifiers, etc. Industrial curing
Previous
Next
Typical performance at 25°C and active cooling
| Parameter | Symbol | Unit | Min | Typ | Max |
|---|---|---|---|---|---|
|
Peak Wavelength |
λp |
nm |
265 |
265 |
270 |
|
Radiant Flux |
Φе |
Wopt
(350mA/LED) |
1.3 |
1.6 |
1.8 |
|
Forward Voltage |
VF |
V |
22 |
24 |
26 |
|
Forward Current |
IF |
A
(350mA/LED) |
- |
1.4 |
- |
|
Spectrum Half Width |
Δλ |
nm |
- |
12 |
- |
|
Viewing Angle, FWHM |
2Ө½ |
° |
- |
80 |
- |
|
On-Axis Irradiance at
1m |
I |
250mA/LED
W/cm2 |
- |
70 |
- |
|
Thermal Resistance |
RJ-b |
℃/W |
- |
15 |
- |
*set by BOLB (optional)
Download Full Product Specifications PDF
DownloadHow can we support your disinfection project today?
Warning
UV emitted from this product. Avoid eye and skin exposure to unshielded product.
UVC LEDs emit deep ultraviolet radiation, with extremely high intensity near their surface. This allows rapid disinfection but safety precautions must be observed during assembly,
testing and field use.
By purchasing the UVC chips (bare dice), packaged LEDs or arrays and from BOLB Inc., the customer agrees to indemnify the manufacturer of any bodily harm as a result of failure to follow the common sense precautions, or warnings and guidelines contained within this Specifications.
It is the buyer’s responsibility to properly design products that ensure safety of end users.
All assembly workers, operators and bystanders must wear eye and skin protection when the UVC LEDs are energized. Bare-eye observation (including through microscopes) and bare-hand handling of a UVC LED in operation is PROHIBITED.
UVC light can be easily absorbed, so any oil or other absorbent liquid or solid substance must NOT be allowed to touch the sapphire side of the UVC chip, or the dome lens on a packaged LED.
