S6060 SMD
Key Features and Benefits:
- World’s Most Efficient High-Power UVC LED (“Wall Plug” Efficiency of 7%)
- Highest Power Single-Chip UVC LED: 100mW at 250mA, 268-280nm, 140mW @ 350mA
- Highest mW/$ UVC LED
- Measured, Documented and Certified L70 Lifetime of 5,000 hrs. (10,000 hrs. to be released in 2022)
- Applications: Water Disinfection, Air Disinfection, Horticulture, Food Safety, Surface Disinfection
- Industry Standard 6x6mm SMD Package
- Zero Ozone, RoHS and Reach compliant, UL tested and certified
Previous
Next
Typical Performance at 250mA (25°C ambient, packaged, Solder point temperature <38°C)
| Parameter | Symbol | Unit | Min. | Typ. | Max |
|---|---|---|---|---|---|
|
Peak Wavelength |
λp |
nm |
268 |
275 |
278 |
|
Radiant Flux |
Φе |
mW |
70 |
100 |
130 |
|
Forward Voltage |
VF |
V |
5.8 |
6.5 |
7.5 |
|
Spectrum Half Width |
Δλ |
nm |
|
10 |
|
|
View Angle |
2Ө½ |
° |
|
150 |
|
|
Thermal Resistance |
RJ-b |
℃/W |
|
8 |
|
Maximum Ratings (25°C ambient, packaged device)
| Parameter | Symbol | Limit | Unit |
|---|---|---|---|
|
Maximum DC Drive Current |
IFM |
350 |
mA |
|
Maximum Pulsed Drive Current |
IFMP |
500 |
mA |
|
Maximum Reverse Voltage |
VRM |
-5 |
V |
|
Maximum Junction Temperature |
Tjmax |
75 |
°C |
|
Operating Temperature Limits |
Topr |
-20 ~ 60 |
°C |
|
Storage Temperature |
Tstg |
-30~ 100 (Humidity <40%) |
°C |
Download Full Product Specifications PDF
DownloadHow can we support your disinfection project today?
Warning
UV emitted from this product. Avoid eye and skin exposure to unshielded product.
UVC LEDs emit deep ultraviolet radiation, with extremely high intensity near their surface. This allows rapid disinfection but safety precautions must be observed during assembly,
testing and field use.
By purchasing the UVC chips (bare dice), packaged LEDs or arrays and from BOLB Inc., the customer agrees to indemnify the manufacturer of any bodily harm as a result of failure to follow the common sense precautions, or warnings and guidelines contained within this Specifications.
It is the buyer’s responsibility to properly design products that ensure safety of end users.
All assembly workers, operators and bystanders must wear eye and skin protection when the UVC LEDs are energized. Bare-eye observation (including through microscopes) and bare-hand handling of a UVC LED in operation is PROHIBITED.
UVC light can be easily absorbed, so any oil or other absorbent liquid or solid substance must NOT be allowed to touch the sapphire side of the UVC chip, or the dome lens on a packaged LED.
